Filter
Top Products
C2630M-C (7/09) 159
5. Select resolution values for individual channels from the drop-down boxes. Table AH describes the available resolution values.
Setting a resolution value for one recording mode sets the resolution value for all modes. For example, setting resolution to 640 x 480 in
Motion recording mode will change the resolution to 640 x 480 in Normal and Alarm recording modes as well.
6. Do the following:
a. Using the ALL frame rate settings slider, set the frame rate for all channels.
b. To set the frame rate for individual channels, use the frame rate slider for each channel to select a frame rate from 1-30 ips (according
to the available capacity for that channel). The frame rate of an individual channel cannot exceed the maximum setting of the ALL
frame rate slider.
7. Click OK.
8. Click Apply when you return to the Schedule Setup screen.
Figure 131. Frame Rate Configuration Screen
Table AH. Resolution Values
Video Format
NTSC PAL
640 704 640 704
CIF 320 x 240 352 x 240 320 x 288 352 x 288
2CIF 640 x 240 704 x 240 640 x 288 704 x 288
4CIF 640 x 480 704 x 480 640 x 576 704 x 576
ᕧ
ᕥ
ᕤ
ᕦ