Filter
Top Products
C2630M-C (7/09) 169
6. Set up the. For information about setting up DHCP or static IP addressing, refer to Setting Up DHCP on page 169 or Setting Up a Static IP
Address on page 170.
Figure 140. Network Setup Page
Setting Up DHCP
Your network must support DHCP, and an active DCHP server must be present for dynamic addressing to work. If you select DHCP and your
network does not include an active DHCP server, the IP address settings will default to addresses in the 169.254.x.x range. Consult your network
administrator for more information.
Access the Network page to set up the DHCP options. For information about accessing the Network page, refer to Setting Up DX8100 Network
Access on page 168.
To configure the HVR to acquire a dynamic IP address through DHCP:
1. In the Network page, click the check box labeled Obtain An IP Address Automatically (DHCP).
2. Click Apply.
ᕣ ᕥᕤ