Filter
Top Products
138 C2630M-C (7/09)
5. Click Apply.
Figure 112. Event-Recording Link Settings: ATM/POS Record Link Settings Section
Linking Cameras to Record in Response to Video Loss Events
To link multiple cameras to record in response to a video loss event:
1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2. Click the Linking button . The Linking page is displayed.
3. Click the Event-Recording Link Settings tab.
4. In the Video-Loss Record Link Settings section, do the following:
a. Select a camera from the Video-Loss Channel drop-down box.
b. Click the button for each camera you want to begin recording in response to a video loss event.
5. Click Apply.
Figure 113. Event-Recording Link Settings: Video-Loss Record Link Settings Section
4
b
4a
4a
4
b
4a