Filter
Top Products
240 C2630M-C (7/09)
Testing E-mail Notification
You test the e-mail notification configuration in the Emergency E-mail Notification page. For information about accessing the Emergency E-mail
Notification page, refer Accessing the Emergency E-mail Notification Setup on page 238.
To test e-mail notification:
1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2. Click the Notification button . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. Select the My E-mail Server Requires Authentication check box (if it is not already selected).
5. Enter your personal e-mail address or the address of someone who can verify the receipt of the test e-mail in the To box.
6. Type DX8100 E-mail Notification Test in the Subject box.
7. Enter the following server settings if necessary:
• Server address (This address should be the same as the SMTP server address you entered above.)
•User name
• Password
8. Click Test E-mail Notification.
Figure 180. E-Mail Test
ᕦ
ᕧ
ᕥ
ᕤ
ᕨ