Filter
Top Products
Maintenance Codes
To perform maintenance of the machine, press the
(Maintenance) button repeatedly until the desired
code appears on the LED, and then press the Black
or
Color
button.
Maintenance
Code
Operation
See
Prints the nozzle check pattern.
Printing the Nozzle Check Pattern
Cleans the Print Head.
Cleaning the Print Head
Cleans the Print Head deeply. Cleaning the Print Head Deeply
Prints the print head alignment
sheet.
A
ligning the Print Head
Scans the print head alignment
sheet.
A
ligning the Print Head
Prints the current head position
adjustment values.
A
ligning the Print Head
Cleans the Paper Feed Roller. Cleaning the Paper Feed Roller
Cleans the inside of the machine.
Cleaning the Inside of the Machine (Bottom Plate
Cleaning)
Switches the size of paper
loaded in the Rear Tray between
A
4 and 8.5" x 11" (Letter).
(This setting is used for making
copies.)
Switching the Page Size between A4 or 8.5" x 11"
(Letter)
Sets the machine to prevent
paper abrasion.
Refer to the "Paper is Smudged/Printed Surface is
Scratched" in the "
Troubleshooting
" of the on-
screen manual:
A
dvanced Guide
.
Selects the read/write attribute of
the Card Slot (MP260 series).
Setting the Read/Write Attribute of the Card Slot
Prints the Language Selection
Sheet for the Photo Index Sheet
(MP260 series).
Setting the Language for the Photo Index Sheet
Scans the Language Selection
Sheet for the Photo Index Sheet
(MP260 series).
Setting the Language for the Photo Index Sheet
Error Codes
When an error occurs,
E
and number appear alternately on the LED to indicate the error code.
Error Code
LED Display
E
+ 1-digit number
(flashing in order)
E
+ 2-digit number
(flashing in order)
Note
For details on the error codes, refer to the "
Troubleshooting
" in the on-screen manual:
A
dvance
d
Guide
.
If an error code with
P
appears, an error that requires contacting your Canon service
representative may have occurred. For details, refer to the "
Troubleshooting
" in the on-screen
manual:
A
dvanced Guide
.
Page 10 of 628 pagesLED Display and Basic Operations