Filter
Top Products
A
dvanced Guide
>
Troubleshooting
> An Error Code Is Displayed on the LED
An Error Code Is Displayed on the LED
Alarm Lamp Flashes Orange
When a machine error occurs, the
Alarm lamp is lit orange and E and number (error code) are
alternately displayed on the LED. Check the error code displayed on the LED and take the
appropriate action to correct the error.
* Depending on the error occured, the
Alarm
lamp is not lit.
Error Code
Cause
A
ction
E, 2
The machine is out of
paper. / Paper does not
feed.
Reload the paper on the Rear Tray correctly and
press the
Black
or
Color
button.
E, 3
Paper jam.
If paper has jammed in the machine, clear the
j
am, reload the paper in the machine correctly
and then press the
Black
or
Color
button.
Paper Jams
E, 4
E, 5
The FINE Cartridge cannot
be recognized.
The FINE Cartridge may not be installed
properly, or the Cartridge may not be compatible
with this machine.
Open the Scanning Unit (Cover) and install the
appropriate FINE Cartridge.
If the error is not resolved, the FINE Cartridge
may be damaged. Contact your Canon service
representative.
E, 7
FINE Cartridge is not
installed in the correct
position.
Make sure that each FINE Cartridge is installed
in the correct position.
Routine Maintenance
E, 8
Ink absorber is almost full. The ink absorber is becoming full.
The machine has a built-in ink absorber to hold
the ink used during Print Head Cleaning.
Press the
Black
or
Color
button to cancel the
error so you can continue printing. Before the ink
absorber becomes completely full, contact a
Canon service representative. (You will need to
replace a particular part of the machine.)
E, 9
(MP240 series)
The machine has not
received a response from
the digital camera. The
digital camera or digital
video camcorder connected
is not compatible with this
machine.
A
communication time out occurs if an
operation takes too long or if it takes too
much time to send data. This may cancel
printing. In such cases, disconnect and
reconnect the USB cable.
When printing from a PictBridge compliant
device, depending on the model or brand of
your device, you may have to select a
PictBridge compliant print mode on the
device before connecting it to the machine.
You may also have to turn on your device or
select Play mode manually after connecting
the device to the machine. Perform
necessary operations before connecting
Page 530 of 628 pagesAn Error Code Is Displayed on the LED