Filter
Top Products
remaining number of copies to be made.
To make 10 to 19 copies
The paper-out error will occur ("E, 2" appears on the LED) when all of the loaded paper has been used to
print. Press the
Stop/Reset
button to release the error.
Note
You can set the print quality to "Fast" only when A4 or Letter-sized plain paper is selected
for the page size and media type.
To set the print quality to "Fast"
(1) Press and hold down the
Color
or
Black
button for 2 or more seconds.
The LED flashes once.
* When you press the
Color
or
Black
button for less than 2 seconds, the machine starts
copying in the print quality "Standard".
(2) Release the button.
The machine starts copying.
When the print quality is set to "Fast", print speed is given priority over quality. To give
priority to quality, copy in the print quality "Standard".
Important
Do not open the Document Cover or move the loaded original until copying is completed.
Note
To cancel copying, press the
Stop/Reset
button.
Switching the Page Size between A4 or 8.5" x 11" (Letter)
You can switch the size of paper loaded in the Rear Tray between A4 and 8.5" x 11" (Letter).
This setting is useful if you usually load Letter-sized paper in the Rear Tray regardless of the page size
indication "A4" on the Operation Panel, and vice versa.
1.
Press the
(Maintenance) button repeatedly until
d
appears.
2.
Press the
Black
button to select A4, or the
Color
button to select 8.5" x 11" (Letter).
Note
When you switch the page size to A4 or 8.5" x 11" (Letter), load paper of the selected size
regardless of the size indicated on the Operation Panel.
- When the page size is set to A4: A4 Plain Paper / A4 Photo Paper
- When the page size is set to 8.5" x 11" (Letter): 8.5" x 11" Plain Paper / 8.5" x 11" Photo
Paper
Page top
Page 28 of 628 pagesCopying Documents