Filter
Top Products
Advanced Guide
Troubleshooting
Contents
> Loading Paper / Originals >
Loading Originals to Copy or Scan
> Loading Originals
Loading Originals
Load originals to copy or scan on the Platen Glass.
Important
After loading the original, be sure to close the Document Cover before starting to copy or scan.
When scanning from a computer using a software application, you need to load originals in a
different way. For details, refer to the on-screen manual:
A
dvanced Guide
.
Note
Make sure any glue, ink, correction fluid, or the like on the original is completely dry before loading it.
1.
Load an original on the Platen Glass.
(1)
Open the Document Cover.
(2)
Load an original with the side to copy or scan FACING DOWN on the Platen
Glass.
A
lign the corner of the original with the alignment mark .
Important
Do not place any objects weighing more than 4.4 lb / 2.0 kg on the Platen Glass.
Do not press or put weight on the original with pressure exceeding 4.4 lb / 2.0 kg. Doing
so may cause the scanner to malfunction or the Platen Glass to break.
The machine cannot scan the shaded area (A) (0.04 inches / 1 mm from the edges of the
Platen Glass).
2.
Close the Document Cover gently.
Page 64 of 628 pagesLoading Originals