Filter
Top Products
For Compact Flash (CF), Microdrive, or xD-Picture Card*, xD-Picture Card Type M*, xD-Picture Card
Type H*:
Caution
Part of the memory card will stick out of the Card Slot, but do not force it into the slot any
further. This can damage the machine or the memory card.
Make sure that the memory card is correctly oriented before inserting it into the Card Slot. If
you force the memory card into the Card Slot in the wrong orientation, the memory card or the
machine can be damaged.
Important
Do not insert more than one memory card at a time.
4.
Close the Card Slot Cover.
Removing the Memory Card
Important
If you used the Card Slot as the memory card drive of a computer, you must perform the "safe
removal" operation on your computer before physically removing the memory card from the
machine.
- In Windows, right-click the removable disk icon and click
Eject
. If
Eject
does not appear on the
screen, make sure that the
Access
lamp is not flashing, and then remove the memory card.
- In Macintosh, drag (Mount drive) into the Trash.
1.
Open the Card Slot Cover.
2.
Make sure that the
Access
lamp is lit, and remove the memory card.
Hold the part of the memory card that is sticking out and remove it from the machine straightforward.
Caution
Do not remove the memory card while the
Access
lamp is flashing. The
Access
lamp flashes
while the machine is reading or writing data from/to the memory card. If you remove the
memory card or turn off the power while the
Access
lamp is flashing, the data saved on the
memory card can be damaged.
3.
Close the Card Slot Cover.
Page 20 of 628 pagesInserting the Memory Card