Filter
Top Products
Operation Panel
(1)
ON button / Power lamp
Turns the power on or off. Before turning on the power, make sure that the Document Cover is closed.
Note
Power and Alarm lamps
You can check the status of the machine with the
Power
lamp and
Alarm
lamp.
-
Power
lamp Off: The power is off.
-
Power
lamp lit green: The machine is ready to print.
-
Power
lamp flashing green: The machine is initializing or shutting down.
-
Alarm
lamp lit or flashing orange: An error has occurred and the machine is not ready to
print. For details, refer to the "
Troubleshooting
" in the on-screen manual:
A
dvance
d
Guide
.
-
Power
lamp flashes green once and
Alarm
lamp flashes orange once alternately: An
error that requires contacting your Canon service representative may have occurred.
For details, refer to the "
Troubleshooting" in the on-screen manual:
A
dvanced Guide
.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the
Power
lamp is not lit. If the power plug is disconnected from the wall outlet while the
Power
lamp is lit or flashing, the machine may become unable to print since the Print Head
is not protected.
(2)
LED (Light Emitting Diode)
Displays the number of copies, Maintenance menu code, or operational status such as an error code.
(3)
[+] button
Specifies the number of copies.
Page 7 of 628 pagesMain Components