Filter
Top Products
RECORD SET2
English 101
To specify the start position and end position
together within a range
(1) Turn the jog dial to move the cursor (blue) to the start
position and then turn the shuttle dial clockwise.
(2) Turn the jog dial to select “A” or “B” and then turn the
shuttle dial clockwise. (“A” or “B” are yellow.)
(3) Turn the jog dial to move the cursor (blue) to the end
position and then turn the shuttle dial clockwise.
11 Turn the jog dial to select “T-1” and
then turn the shuttle dial clockwise.
“T-1” flashes.
12 Turn the jog dial to select the time
period and then turn the shuttle dial
clockwise.
The cursor moves to “LEVEL”.
[Settings] ( indicates default setting)
13 Turn the shuttle dial clockwise.
“OFF” flashes.
14 Turn the jog dial to select “OFF” or a
sensitivity level between “1” to “10” and
then turn the shuttle dial clockwise.
The cursor moves to “MODE”.
[Settings] ( indicates default setting)
15 Turn the shuttle dial clockwise.
“A” flashes.
Setting time periods
Setting Description
T-1 Time period T-1
T-2 Time period T-2
T-3 Time period T-3
T-4 Time period T-4
CH01 T-1 LEVEL : OFF MODE : A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Start position
End position
CH01 T-1 LEVEL : OFF MODE : A
A
CH01 T-1 LEVEL : OFF MODE : A
A
Setting sensitivity levels
Setting Description
OFF Motion sensing is disabled.
1 to 10
Motion sensing is enabled. Lower numbers
correspond to higher levels of sensitivity.
Setting sensor modes
CH01 T-1 LEVEL : OFF MODE : A
A
CH01 T-1 LEVEL : OFF MODE : A
A
CH01 T-1 LEVEL : OFF MODE : A
A
e00_l8hbd_xe_7.book Page 101 Tuesday, April 5, 2005 11:41 AM