58 English
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
MENU CONFIGURATION AND OPERATIONS
This section describes the menu configuration and the menu
items to be selected for each operation.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select a function.
Example: “2.RECORD SET”
The cursor moves.
3 Turn the shuttle dial clockwise.
The sub-menus appear.
The cursor is positioned on the first setting item.
4 Turn the jog dial to select an item and
then turn the shuttle dial clockwise.
The setting screen is displayed. The cursor is positioned on
the first setting item.
To return to the previous menu
Turn the shuttle dial counter-clockwise.
5 Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
z Menus can be opened even during the recording process.
z Menu settings cannot be changed during the recording
process. To make changes to menu settings, first stop
recording.
Basic menu operations
[EXIT/OSD] button
Jog dial
Shuttle dial
[MENU] button
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
8.ADVANCED MENU SET ->
MOVE:JOG SELECT:SHUTTLE
MENU
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
8.ADVANCED MENU SET ->
MOVE:JOG SELECT:SHUTTLE
Cursor
position
<RECORD SET>
1.NORMAL REC EASY SET ->
2.RECORDING AREA SET ->
3.RECORDING CONDITIONS SET ->
4.NORMAL REC MODE SET ->
5.PROGRAM REC SET ->
6.TIMER SET ->
7.ALARM REC MODE SET ->
8.ALARM OPERATION SET ->
MOVE:JOG SELECT:SHUTTLE
<RECORDING AREA SET>
TOTAL CAPACITY : 500GB
INTERNAL HDD : 500GB
RECORDING AREA : 80 %
AREA FULL RESET ->
ARCHIVE AREA : 20 %
AREA FULL RESET ->
CAUTION: WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
EXIT/OSD
e00_l8hbd_xe_7.book Page 58 Tuesday, April 5, 2005 11:41 AM