Filter
Top Products
RECORD SET3
English 187
Audio can be recorded together with images during alarm
recording. Note, however, that since this audio data is also
stored in the recording area, the recording time for this area
decreases.
6 Set “AUDIO RECORDING”.
[Settings] ( indicates default setting)
z Audio recording can be enabled when the recording rate is
between A50 and A1 FPS.
7 Set “ALARM INTERLEAVE” to the
desired recording pattern.
[Settings] ( indicates default setting)
8 Set “REC RATE” to the desired
recording rate.
[Settings] ( indicates default setting)
The letter “A” is displayed in front of recording rates that can
be set for audio recording.
z When only one camera is connected, recording is
performed at 25 FPS even if 50 FPS is set.
z When two or more cameras are connected and 50 FPS is
set, the actual recording rate is roughly the recording rate
divided by the number of cameras. (Example: When 4
cameras are connected and the recording rate setting is 50
FPS, the actual recording rate is 12.5 FPS)
9 Set “DURATION” to the desired alarm
recording duration.
[Settings] ( indicates default setting)
Use the following procedure to set the recording conditions to
be used for pre-alarm. (JP.162)
10 Set “PRE-ALARM RECORDING” to
“ON” or “OFF”.
[Settings] ( indicates default setting)
z If “ALARM RECORDING” is set to “OFF”, the PRE-ALARM
RECORDING setting is displayed as “**” and cannot be
set.
11 Set “REC RATE” to the desired
recording rate.
[Settings] ( indicates default setting)
The letter “A” is displayed in front of recording rates that can
be set for audio recording.
Setting audio recording
Setting Description
OFF Audio is not recorded.
ON Audio is recorded.
Setting the alarm interleave
Setting Description
ONLY
Video is recorded only from cameras with an alarm
occurring.
SW
Recording is switched between video from a
camera for which an alarm has occurred and video
from all connected cameras.
Setting Description
A50, A25, A16.67, A12.5,
A8.333, A6.25, A5, A4.167,
A3.571, A3.125, A2.778,
A2.5, A2.273, A1.923,
A1.667, A1.471, A1.316,
A1.19, A1.087, A1
Recording is performed at the
selected recording rate (unit:
FPS). (Audio can be recorded.)
0.5, 0.333, 0.25, 0.2, 0.1,
0.05, 0.033
Recording is performed at the
selected recording rate (unit:
FPS). (Audio cannot be recorded.)
Setting Description
5SEC, 10SEC, 20SEC,
40SEC, 1MIN, 2MIN, 3MIN,
4MIN, 5MIN, 10MIN, 15MIN
Records for the set duration for
each alarm.
CC
Records while an alarm is
activated (Recording continues
for five seconds even if less than
five seconds).
Setting pre-alarm recording.
Setting Description
OFF Pre-alarm recording is disabled.
ON Pre-alarm recording is enabled.
Setting Description
A100, A50, A25, A16.67,
A12.5, A8.333, A6.25,
A5, A4.167, A3.571,
A3.125, A2.778, A2.5,
A2.273, A1.923, A1.667,
A1.471, A1.316, A1.19,
A1.087, A1
Recording is performed at the
selected recording rate (unit:
FPS).
e00_l8hbd_xe_7.book Page 187 Tuesday, April 5, 2005 11:41 AM