Filter
Top Products
English 189
4 GENERAL SET
Set conditions for the display of data on the unit’s monitor by
selecting “ON” or “OFF” for each item.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “3. GENERAL SET”.
The “GENERAL SET” screen is displayed.
3 Click “1. DISPLAY SET”.
The “DISPLAY SET” screen is displayed.
4 Select “ON” or “OFF” for each display
item.
5 Click [SAVE].
The setting is saved.
z These settings apply to information displayed on the
monitor connected to the unit, not to information displayed
on the PC monitor.
Use the following procedure to set a warning buzzer that
sounds when an alarm occurs or when the hard disk space
reaches remaining-space warning level.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “3. GENERAL SET”.
The “GENERAL SET” screen is displayed.
3 Click “2. BUZZER SET”.
The “BUZZER SET” screen is displayed.
4 Select “ON” or “OFF” for each display
item.
1. DISPLAY SET
Item
Default
setting
Description
(1) DATE ON
Displays the current date or
recording date.
(2) TIME ON
Displays the current time or
recording time.
(3) QUALITY ON
Displays the picture quality for
recording or playback.
(4) AUDIO ON
Displays the audio status during
recording or playback.
(5)
ALARM
COUNT
ON
Displays the number of recorded
alarms.
(6)
ALARM
TYPE
ON
Displays the alarm recording type.
z For alarm recording:
“ALARM” is displayed.
z For pre-alarm recording:
“PRE” is displayed.
(7) TITLE ON Displays the camera title.
GENERAL SET
1. DISPLAY SET
2. BUZZER SET
3. SECURITY LOCK SET
4. USER ID SET
5. RS-232C/RS-485 SET
6. HDD SET
7. NETWORK SET
8. NETWORK CONTROL SET
DISPLAY SET
DATE :
ON
TIME :
ON
QUALITY :
ON
AUDIO :
ON
ALARM COUNT :
ON
ALARM TYPE :
ON
TITLE :
ON
SAVE
(1)
5
(3)
(7)
(5)
(2)
(4)
(6)
2. BUZZER SET
Item
Default
setting
Description
(1) ALARM OFF
Sounds a buzzer when an alarm is
detected.
(2)
DISK
FULL
ON
Sounds a buzzer when the amount
of data stored in each of the hard
disk recording areas reaches the
remaining-space warning level
(JP.182).
(3)
DISK
ERROR
ON
Sounds a buzzer when a hard-disk
error occurs.
(4)
LOCK
WARNING
ON
Sounds a buzzer when a restricted
operation button is pressed during
security lock.
Specifically, the buzzer sounds
twice with an interval of
approximately 0.5 seconds.
(5) KEY IN OFF
Buzzer emits a key-operation sound
each time a button is pressed.
(6)
NON
REC
OFF
Sounds a buzzer when recording is
stopped.
BUZZER SET
ALARM :
OFF
DISK FULL :
ON
DISK ERROR :
ON
LOCK WARNING:
ON
KEY IN :
OFF
NON REC :
OFF
SAVE
(1)
(2)
5
(3)
(4)
(5)
(6)
e00_l8hbd_xe_7.book Page 189 Tuesday, April 5, 2005 11:41 AM