Filter
Top Products
INITIAL SET1
English 69
Example 1: Setting periods using TIME PERIOD A and
TIME PERIOD B
z TIME PERIOD A
T-1=6:00
T-2=11:30
T-3=13:30
T-4=18:00
z TIME PERIOD B
T-1=6:00
T-2=8:00
T-3=14:30
T-4=20:00
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select “1.INITIAL
SET” and then turn the shuttle dial
clockwise.
The <INITIAL SET> screen is displayed.
3 Turn the jog dial to select “5.TIME
PERIOD SET” and then turn the shuttle
dial clockwise.
The <TIME PERIOD SET> screen is displayed.
For both TIME PERIOD A and TIME PERIOD B, all settings
are “00:00” by default setting.
4 Turn the jog dial to select “TIME
PERIOD A” and then turn the shuttle
dial clockwise.
“00:” for T-1 flashes (indicating the hour).
5 Set the time for T-1.
(1) Turn the jog dial to select “06” and then turn the shuttle
dial clockwise.
“:00” for T-1 flashes (indicating the minutes).
(2) Turn the shuttle dial clockwise.
“00:” for T-2 flashes (indicating the hour).
6 Set the time for T-2.
(1) Turn the jog dial to select “11” and then turn the shuttle
dial clockwise.
“:00” for T-2 flashes (indicating the minutes).
(2) Turn the jog dial to select “30” and then turn the shuttle
dial clockwise.
“00:” for T-3 flashes (indicating the hour).
7 Use the same procedure to set the hour
and minutes for T-3 and T-4.
8 Use the same procedure to set the hour
and minutes for T-1 to T-4 in TIME
PERIOD B.
z Settings for T-1 through T-4 cannot be made in such a way
that they extend over two days (i.e., include midnight). If
“00:00” (midnight) must be set, this should be done using
T-1.
Any setting of “00:00” for T-2 through T-4 is skipped.
Example: T-1 T-2 T-3 T-4
06:00 12:00 18:00 00:00
In the above example, T-4 (00:00) is skipped and T-3
operates between 18:00 and 06:00.
z Furthermore, when T-1 through T-4 are all set to “00:00”,
all but T-1 are ignored and T-1 operates from midnight to
midnight the next day.
Timer period settings
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION/ROI SENSOR TIME PERIOD A
MENU
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION/ROI SENSOR TIME PERIOD A
<TIME PERIOD SET> [KEY]
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
SELECT TIME PERIOD
<TIME PERIOD SET> [KEY]
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 06:00 11:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
e00_l8hbd_xe_7.book Page 69 Tuesday, April 5, 2005 11:41 AM