Filter
Top Products
36 English
SEARCHING FOR RECORDED VIDEO5
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
Use the following procedure to perform an alarm search or
alarm thumbnail search by defining the period (month, week,
day or time) of the alarm recorded video.
1 Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH> screen
is displayed.
2 Turn the jog dial to select “ALARM LOG
SEARCH” and then turn the shuttle dial
clockwise.
The <ALARM LOG SEARCH> screen is displayed.
On the DSR-5009P, cameras No. 01-09 are displayed.
3 Turn the shuttle dial clockwise.
The “TERM” setting flashes.
4 Turn the jog dial to select “TERM” and
then turn the shuttle dial clockwise.
The screen display changes to reflect the specified period.
Press the or [ALARM] button to change the month/
week/date/time.
[Settings] ( indicates default setting)
5 Turn the jog dial to select the date, time
or minute and then turn the shuttle dial
clockwise.
The selected day (or hour or minutes) is indicated with a
yellow frame.
Alarm recording areas are indicated in red and areas with no
recordings in gray.
Reselecting the area cancels the original selected area.
To confirm normal recording
Press the [FUNC.] button to search for normal recording. A
blue mark is displayed at the top left of the screen, and
normally recorded parts are displayed in blue. (The search for
normal recording may take some time.)
To abort the search, turn the shuttle dial counter-clockwise.
z If “MONTH” is selected in step 4 above, each frame
represents one day. If “WEEK” is selected, four frames
represent one day. If “DAY” is selected, each frame
represent one hour. If “HOUR” is selected, each frame
represents two minutes.
Alarm log search
<SEARCH>
ALARM LOG SEARCH ->
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
SEARCH
< ALARM LOG SEARCH > TERM:MONTH
01-01-05 1 5 10 15 20 25 30
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
Camera
number
Date, day or time
< ALARM LOG SEARCH > TERM:MONTH
01-01-05 1 5 10 15 20 25 30
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
Setting Description
MONTH Displays one month.
WEEK Displays one week.
DAY Displays one day.
HOUR Displays one hour.
< ALARM LOG SEARCH > TERM:DAY
01-01-05 00 06 12 18
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
< ALARM LOG SEARCH > TERM:DAY
01-01-05 00 06 12 18
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
e00_l8hbd_xe_7.book Page 36 Tuesday, April 5, 2005 11:41 AM