Filter
Top Products
RECORD SET2
English 95
11 Turn the jog dial to select “SW” or
“ONLY” and then turn the shuttle dial
clockwise.
The cursor moves to “REC RATE”.
[Settings] ( indicates default setting)
* Example of recording pattern for SW and ONLY
12 Turn the shuttle dial clockwise.
“A12.5” flashes.
(Default setting: 12.5FPS)
13 Turn the jog dial to select the “REC
RATE” setting and then turn the shuttle
dial clockwise.
The cursor moves to “DURATION”.
[Settings] ( indicates default setting)
z When only one camera is connected, recording is
performed at 25 FPS even if 50 FPS is set.
z When two or more cameras are connected and 50 FPS is
set, the actual recording rate is roughly the recording rate
divided by the number of cameras. (Example: When 4
cameras are connected and the recording rate setting is 50
FPS, the actual recording rate is 12.5 FPS)
14 Turn the shuttle dial clockwise.
“20SEC” flashes.
Setting Description
SW
Recording is switched between video from a
camera for which an alarm has occurred and
video from all connected cameras.
ONLY
Video is recorded only from cameras with an
alarm occurring.
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE:A12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
02 02 02 02 020201 03 04
02 02 02 02 0201 03 04 040405 06 07 08
Alternate recording of multiple alarm recordings
Recording until alarm is cancelled
Alarm Alarm
Alarm Alarm is cancelled
SW
ONLY
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE:A12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
Setting Description
50, 25, 16.67, 12.5,
8.333, 6.25, 5, 4.167,
3.571, 3.125, 2.778, 2.5,
2.273, 1.923, 1.667,
1.471, 1.316, 1.19, 1.087,
1, 0.5, 0.333, 0.25, 0.2,
0.1, 0.05, 0.033
Recording is performed at the
selected recording rate (unit: FPS).
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE:A12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE:A12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
e00_l8hbd_xe_7.book Page 95 Tuesday, April 5, 2005 11:41 AM