Filter
Top Products
54 English
SAVING (COPYING) RECORDED VIDEO6
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
Use the following procedure to copy recording area or archive
area video to a CD-R/RW or DVD+R/+RW.
Example: Copying the maximum video to the copy
destination
z For compatibility, refer to the SANYO homepage.
http://www.sanyosecurity.com/
1 Connect a recordable CD or DVD drive
and insert a disk.
z The digital video recorder has one USB terminal on the
front and one on the back, but they cannot be used
simultaneously. Connect recordable drive to either
terminal. If both sides have devices connected, the front
terminal is prioritized.
2 Play video to be copied on a full screen.
3 Press the [STILL] button when the frame
to be copied is displayed.
4 Press the [COPY] button.
The COPY indicator lights up and the copy setting screen is
displayed.
5 Turn the jog dial to select “COPY TO”
and then turn the shuttle dial clockwise.
“ARCHIVE AREA” flashes.
6 Turn the jog dial to select “DISC
WRITER” and then turn the shuttle dial
clockwise.
The cursor moves to “UNIT”.
Copying to a CD-R/RW or DVD+R/
+RW
[COPY] button
[PLAY/STOP] button
Shuttle dial
Jog dial
[STILL] button
USB
STILL
COPY
COPY TO : ARCHIVE AREA
UNIT : PICTURES
AUDIO : OFF
HOW MANY : 1
COPY START ->
FORMAT/ERASE : COMPACT FLASH
FORMAT/ERASE START ->
CHANGE:JOG SET:SHUTTLE
COPY TO : ARCHIVE AREA
UNIT : PICTURES
AUDIO : OFF
HOW MANY : 1
COPY START ->
FORMAT/ERASE : COMPACT FLASH
FORMAT/ERASE START ->
CHANGE:JOG SET:SHUTTLE
COPY TO : DISC WRITER
UNIT : PICTURES
AUDIO : OFF
HOW MANY : 1
COPY START ->
FORMAT/ERASE : COMPACT FLASH
FORMAT/ERASE START ->
CHANGE:JOG SET:SHUTTLE
e00_l8hbd_xe_7.book Page 54 Tuesday, April 5, 2005 11:41 AM