Filter
Top Products
ADVANCED MENU SET8
English 143
5 Turn the shuttle dial clockwise.
Area settings mode is activated and an icon appears in the
upper right part of the screen.
6 Turn the jog dial to move the cursor (the
orange ) to the upper left of the
position where an area is to be set and
then turn the shuttle dial clockwise.
The cursor moves to the bottom right.
Turn the jog dial to move the cursor to the left or right.
Press the [FUNC.] button and turn the jog dial to move the
cursor up or down.
7 Turn the jog dial to move the cursor (the
orange ) to the lower right of the
position where an area is to be set and
then turn the shuttle dial clockwise.
The cursor (the orange ) moves to the top left of frame 2.
Turn the jog dial to move the cursor to the left or right.
Press the [FUNC.] button and turn the jog dial to move the
cursor up or down.
8 Set the areas in frame 2 and frame 3 in
the same way.
The cursor moves to “T-1”.
z Turn the shuttle dial counter-clockwise to return to the
previous operation.
9 Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
z If areas coincide, the smaller area number is prioritized.
z Large ROI size decreases ROI effectiveness.
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
Icon
2
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
FUNC.
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
FUNC.
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
EXIT/OSD
e00_l8hbd_xe_7.book Page 143 Tuesday, April 5, 2005 11:41 AM