Filter
Top Products
22 English
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
2 MONITORING VIDEO FROM A CAMERA
Example: Selecting Camera 2
1 Press the No. 2 [CAMERA SELECT]
button.
The CAMERA SELECT indicator lights up and video from
Camera 2 is displayed on a full screen.
1 Press the [ZOOM] button during
monitoring of camera video.
Press the button corresponding to the camera for which video
is being magnified.
The ZOOM indicator lights up and a blue zoom frame appears
in the center of the screen.
2 Move the zoom frame to the area to be
magnified.
z Turn the jog dial to move the zoom frame to the left or right.
z Turn the shuttle dial clockwise and then turn the jog dial to
move the zoom frame vertically.
Move the zoom frame to the area to be magnified.
3 Turn the shuttle dial clockwise.
The area enclosed by the zoom frame is magnified (by a
factor of 2).
[CAMERA SELECT] button
[MULTI] button
[SEQUENCE] button
[MON2] button
[QUAD] button
[PLUS] button
[ZOOM] button
Shuttle dial
Jog dial
Viewing on a full screen
Viewing enlarged live images
02
ZOOM
02
e00_l8hbd_xe_7.book Page 22 Tuesday, April 5, 2005 11:41 AM