Filter
Top Products
GENERAL SET3
English 115
Set when connected to a PC through the rear panel RS-232C
terminal or when connected to a system controller through the
RS-485 terminal (A, B).
To perform PPP settings (modem), set to RS-485.
The DATA SPEED setting is for the RS-485. Set the PPP
dialing speed in “BAUD RATE” in the <PPP SET> screen.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select “3.GENERAL
SET” and then turn the shuttle dial
clockwise.
The <GENERAL SET> screen is displayed.
3 Turn the jog dial to select “4.RS-232C/
RS-485 SET” and then turn the shuttle
dial clockwise.
The <RS-232C/RS-485 SET> screen is displayed.
4 Turn the shuttle dial clockwise.
“RS-485” flashes.
5 Turn the jog dial to select “RS-232C” or
“RS-485” and then turn the shuttle dial
clockwise.
The cursor moves to “DATA SPEED”.
[Settings] ( indicates default setting)
6 Turn the shuttle dial clockwise.
“19200” flashes.
7 Turn the jog dial to select the “DATA
SPEED” setting and then turn the
shuttle dial clockwise.
Settings are complete if “RS-232C” is selected for
“CONTROL”. Press the [EXIT/OSD] button.
If “RS-485” is selected, proceed to the next step.
[Settings] ( indicates default setting)
Setting RS-232C and RS-485
MENU
<RS-232C/RS-485 SET>
CONTROL : RS-485
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
<RS-232C/RS-485 SET>
CONTROL : RS-485
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
Setting Description
RS-485
Camera control (SANYO + other companies’)
from the DVR unit enabled
Camera control (SANYO + other companies’)
from the network enabled
Camera control (SANYO + other companies’)
from the controller enabled
PC connected to RS-232C cannot be used
RS-232C
Camera control (other companies’) from the
DVR unit enabled
Camera control (other companies’) from the
network enabled
Controller cannot be used
The DVR operations from a PC connected to
RS-232C are enabled
Setting Description
2400, 4800, 9600, 19200 Sets the data speed.
<RS-232C/RS-485 SET>
CONTROL : RS-485
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
<RS-232C/RS-485 SET>
CONTROL : RS-485
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
<RS-232C/RS-485 SET>
CONTROL : RS-485
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
e00_l8hbd_xe_7.book Page 115 Tuesday, April 5, 2005 11:41 AM