Filter
Top Products
202 English
ADVANCED MENU SET9
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
z The digital video recorder supports the following SMTP
authentication:
• CRAM-MD5 • LOGIN
z For the digital video recorder to perform authentication, the
provider must have authentication settings made. Make the
authentication settings after confirming the type of
authentication supported by the connected provider.
Set when cameras with remote operation capability are
connected.
Perform the following connections and set camera control to
use in full screen display.
Connections necessary for remote operation:
z Connect coaxial control cameras to the VIDEO terminal.
z Connect the Sanyo RS-485 control camera to the RS-485
terminal (RJ-11).
z Connect the other companies’ RS485/422 control camera
to the 2ND RS485/422 terminal.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “8. ADVANCED MENU SET”.
The “ADVANCED MENU SET” screen is displayed.
3 Click “2. CAMERA CONTROL SET”.
The “CAMERA CONTROL SET” screen is displayed.
The DSR-5009P displays only nine channels.
4 Set “PROTOCOL” to the protocol
corresponding to the dome camera.
[Settings] ( indicates default setting)
5 The address (000 to 127) is displayed in
“ADD”.
6 Use the same procedure to set the other
channels.
7 Set “2ND RS-485/422 PROTOCOL”.
8 Click [SAVE].
The setting is saved.
This setting is required to connect to the provider.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “8. ADVANCED MENU SET”.
The “ADVANCED MENU SET” screen is displayed.
3 Click “3. PPP SET”.
The “PPP SET” screen is displayed.
2. CAMERA CONTROL SET
CAMERA CONTROL SET
2ND RS-485/422 PROTOCOL :
PROTOCOL ADD.
----
OFF
CH
1
2
3
4
5
6
7
8
CH PROTOCOL ADD.
9
10
11
12
13
14
15
16
SAVE
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
5
4
8
7
Setting Description
OFF No protocol
SANYO COAX1 SANYO COAX
SANYO RS485 SANYO RS485
BBV COAX BBV COAX
PELCO COAX PELCO COAX
2ND RS-485/422 2ND RS-485/422
SANYO COAX2 SANYO COAX (High speed)
3. PPP SET
PPP SET
SAVE
DIAL UP
OFF
:
LOGIN ID :
AUTO IP ADDRESS 0. 0. 0. 0:
:PASSWORD
:
AUTO
AUTHENTICATION
:PROVIDER TEL. NO.
CIRCUIT TYPE
TONE
:
MODEM INITI. COMMAND
:
BAUD RATE DATA SIZE : 8 bitsbps,
115200
:
NONE
STOP BITPARITY : ,
1
:
DIAL IN
OFF
:
LOGIN ID :
:PASSWORD
IP ADDRESS : 192
. 168 . 250 . 251
CLIENT IP ADDRESS : 192
:
AUTO
AUTHENTICATION
. 168 . 250 . 250
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
e00_l8hbd_xe_7.book Page 202 Tuesday, April 5, 2005 11:41 AM