Filter
Top Products
140 English
ADVANCED MENU SET8
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
7 Turn the jog dial to select the
“QUALITY” setting and then turn the
shuttle dial clockwise.
“OFF” flashes for “ACTIVE ROI”.
[Settings] ( indicates default setting)
8
Turn the jog dial to select “ON” or “OFF”
and then turn the shuttle dial clockwise.
The cursor moves to “STATIC AREA 2”.
[Settings] ( indicates default setting)
9 Use the same procedure to set the
“QUALITY” and “ACTIVE ROI” settings
in “STATIC AREA 2” and “STATIC
AREA 3”.
10 Turn the shuttle dial clockwise.
The cursor moves to “EFFECTIVE REC MODE”.
11 Turn the shuttle dial clockwise.
“NORMAL REC” flashes.
12 Turn the jog dial to select the
“EFFECTIVE REC MODE” setting and
then turn the shuttle dial clockwise.
Set the recording mode to enable ROI.
[Settings] ( indicates default setting)
Setting Description
MIN Lowest quality
LOW Low quality
OFF
Normal
(Same picture quality as outside ROI area)
HIGH Fine
MAX Best quality
Setting Description
OFF Activates ROI always
ON
Activates ROI only in areas with motion
detected
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : OFF OFF
STATIC AREA 3 : OFF OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : OFF OFF
STATIC AREA 3 : OFF OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : LOW OFF
STATIC AREA 3 : HIGH OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
Setting Description
NORMAL REC ROI is enabled during normal recording.
ALARM REC ROI is enabled during alarm recording.
NORMAL/
ALARM
ROI is enabled during normal and alarm
recording.
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : LOW OFF
STATIC AREA 3 : HIGH OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : LOW OFF
STATIC AREA 3 : HIGH OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : LOW OFF
STATIC AREA 3 : HIGH OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
e00_l8hbd_xe_7.book Page 140 Tuesday, April 5, 2005 11:41 AM