Filter
Top Products
154 English
GETTING PREPARED1
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
See P.205 for installing and operating DVR Viewer2.
After installing DVR Viewer2, use the following procedure to
make the Internet security settings.
1 Select [Internet Options...] from the
Internet Explorer [Tools] menu.
The [Internet Options] window is displayed.
Example: Windows XP
2 Click the [Security] tab.
The [Security] screen is displayed.
3 Click [Custom Level...].
The [Security Settings] window is displayed.
Confirm that [Run ActiveX controls and plug-ins] is set to
[Enable].
If this is not the case, click [Enable] for [Run ActiveX controls
and plug-ins] to configure this setting as shown below.
This completes the Internet security setting procedure.
Installing DVR Viewer2
Setting Internet Options
e00_l8hbd_xe_7.book Page 154 Tuesday, April 5, 2005 11:41 AM