Filter
Top Products
ADVANCED MENU SET9
English 203
z The IP address automatically allocated by the Internet
service provider is displayed after a dial-up connection for
“AUTO IP ADDRESS”.
4 Set “DIAL UP” to “ON” or “OFF”.
If no dial-up connection is to be used, select “OFF” and go to
step 9.
If a dial-up connection is to be used, select “ON” and perform
steps 5 to 8.
[Settings] ( indicates default setting)
5 Enter the telephone number of the
provider in “PROVIDER TEL. NO.”
under “DIAL UP”.
6 Set “LOGIN ID” under “DIAL UP”.
7 Set “PASSWORD” under “DIAL UP”.
8 Set “AUTHENTICATION” under “DIAL
UP” to an authentication protocol.
[Settings] ( indicates default setting)
9 Set “DIAL IN” to “ON” or “OFF”.
If no dial-in connection is to be used, select “OFF” and go to
step 15.
If a dial-in connection is to be used, select “ON” and perform
steps 10 to 14.
[Settings] ( indicates default setting)
10 Set “LOGIN ID” under “DIAL IN”.
11 Set “PASSWORD” under “DIAL IN”.
12 Set “AUTHENTICATION” under “DIAL
IN” to an authentication protocol.
[Settings] ( indicates default setting)
13 Set “IP ADDRESS” under “DIAL IN” to
the IP address of the digital video
recorder.
14 Set “CLIENT IP ADDRESS” under “DIAL
IN” to the IP address of the PC.
15 Set “CIRCUIT TYPE” to the type of
phone line connected to the modem.
[Settings] ( indicates default setting)
16 Set “MODEM INITI. COMMAND” to an
AT command.
Enter an AT command to control the modem. Enter a
command that begins with “AT” and specifies the modem
manufacturer and then a command that switches flow control
to software control.
17 Set “BAUD RATE”.
z Use the DATA SPEED of the connected modem.
18 Set “PARITY”.
19 Set “STOP BIT”.
20 Click [SAVE].
The setting is saved.
Use the following procedure to synchronize the time using the
Internet or an NTP server on a LAN.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “8. ADVANCED MENU SET”.
The “ADVANCED MENU SET” screen is displayed.
Setting Description
OFF Dial-up connection is disabled.
ON Dial-up connection is enabled.
Setting Description
AUTO
PAP or CHAP authentication is detected
automatically.
PAP PAP authentication is used.
CHAP CHAP authentication is used.
Setting Description
OFF Dial-in connection is disabled.
ON Dial-in connection is enabled.
Setting Description
AUTO
PAP or CHAP authentication is detected
automatically.
PAP PAP authentication is used.
CHAP CHAP authentication is used.
Setting Description
DTMF Touch-tone line
PULSE Rotary dial line
4. NTP SET
e00_l8hbd_xe_7.book Page 203 Tuesday, April 5, 2005 11:41 AM