Filter
Top Products
192 English
GENERAL SET4
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
This screen displays settings relevant to the unit’s interfaces.
Settings cannot be changed.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “3. GENERAL SET”.
The “GENERAL SET” screen is displayed.
3 Click “5. RS-232C/RS-485 SET”.
The “RS-232C/RS-485 SET” screen is displayed.
This screen displays information regarding the hard disk.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “3. GENERAL SET”.
The “GENERAL SET” screen is displayed.
3 Click “6. HDD SET”.
The “HDD SET” screen is displayed.
(1) Hard disk capacity
Displays the total capacity of the hard disk.
If the hard disk is expanded, the capacity is displayed for each
disk.
(2) MIRRORING
Displays settings relevant to mirroring-type recording on the
digital video recorder.
z Mirroring:
When the hard disk is expanded, the same video can be
recorded to both hard disks in a process known as
“mirroring”. Even if a problem occurs in the writing of video
data to one of the disks, it is possible to extract normal data
from the other disk when this function is turned on.
(3) PLAYBACK DRIVE
This item indicates which of the hard drives is used to provide
video for playback when mirroring is turned on.
5. RS-232C/RS-485 SET
Item Description
(1) CONTROL Displays the type of interface.
(2) DATA SPEED Displays the communication speed.
(3) STATUS INFO
Displays whether or not status
information is transmitted during
RS-232C/RS-485 communication.
(4) ALARM INFO
Displays whether or not alarm
information is transmitted during
RS-232C/RS-485 communication.
(5) ADDRESS Displays the address.
RS-232C/RS-485 SET
DATA SPEED : 19200
CONTROL : RS-485
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
(1)
(2)
(3)
(4)
(5)
6. HDD SET
Setting Description
ON Mirroring recording enabled.
OFF Mirroring recording disabled.
Setting Description
*** Mirroring is disabled.
MASTER Playback data is read from master disk.
SLAVE Playback data is read from slave disk.
HDD SET
MIRRORING : ON
PLAYBACK DRIVE :
MASTER
SAVE
DISK 1
: 82 GB : 80 GB
DISK 2
EX - DISK 1
: 82 GB : 80 GB
EX - DISK 2
EX - DISK 3
: 82 GB : 80 GB
EX - DISK 4
(1)
(2)
(3)
e00_l8hbd_xe_7.book Page 192 Tuesday, April 5, 2005 11:41 AM