Filter
Top Products
180 English
INITIAL SET2
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
8 Click [SAVE].
The setting is saved.
Use the following procedure to set specific days as holidays.
When a day is specified as a holiday, timer recording for that
day is performed as if it were a Sunday.
Dates such as national holidays and company holidays can be
set as holidays when you want those dates to have the same
security as Sundays.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “1. INITIAL SET”.
The “INITIAL SET” screen is displayed.
3 Click “3. HOLIDAY SET”.
The “HOLIDAY SET” screen is displayed.
4 Specify the days to be treated as
holidays.
Left column: Day, Right column: Month
A maximum of 20 different days can be specified as holidays.
5 Click [SAVE].
The setting is saved.
z If “DLY” is set using timer settings, timer recording on the
above-mentioned holidays is also performed in accordance
with daily settings. In other words, “DLY” includes Sundays
and is given priority over other settings.
z If a day is selected in February, April, June, September or
November that does not exist (see table below), this is
changed automatically to the last day of the month. No
distinction is made between leap years and normal
calendar years.
3. HOLIDAY SET
1 11
:
-
-
-
-
-
-
-
-
-
-
2 12
:
3 13
:
4 14
:
5 15
:
6 16
:
7 17
:
8 18
:
9 19
:
10 20
:
HOLIDAY SET
SAVE
4
5
Month Non-existent day
Day changed to
(last day of the
month)
2 30, 31 29
4, 6, 9, 11 31 30
e00_l8hbd_xe_7.book Page 180 Tuesday, April 5, 2005 11:41 AM