Filter
Top Products
ADVANCED MENU SET8
English 141
13 Turn the shuttle dial clockwise.
The <ROI (AREA/SENSITIVITY)> screen is displayed.
z When “QUALITY” are all set to “OFF”, the <AREA/
SENSITIVITY> screen is not displayed.
z The frame is not displayed for “STATIC AREA” numbers
with “QUALITY” set to “OFF”.
When only “QUALITY” is set for “STATIC AREA”, “CH-01”
appears in the bottom of the screen. Set the area for ROI.
(JP.142)
14 Turn the jog dial to select “T-1” and
then turn the shuttle dial clockwise.
“T-1” flashes.
[Settings] ( indicates default setting)
z “T-1” through “T-4” are the times of TIME PERIOD A or
TIME PERIOD B set on the <TIME PERIOD SET> screen.
(JP.69)
15 Turn the jog dial to select the time
period and then turn the shuttle dial
clockwise.
The cursor moves to “LEVEL”.
16 Turn the shuttle dial clockwise.
“OFF” flashes.
17 Turn the jog dial to select the response
sensitivity and then turn the shuttle dial
clockwise.
While responding, a beep sounds and the area number is
highlighted.
The cursor moves to “TIME LAG”.
[Settings] ( indicates default setting)
z Set “TIME LAG” to OFF when “LEVEL” is set.
Setting Description
T-1 Time period T-1
T-2 Time period T-2
T-3 Time period T-3
T-4 Time period T-4
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
Setting Description
OFF Response sensitivity is disabled.
1 - 10
Response sensitivity is enabled. Lower
numbers correspond to higher levels of
sensitivity.
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
e00_l8hbd_xe_7.book Page 141 Tuesday, April 5, 2005 11:41 AM