Sanyo DSR-5009P DVR User Manual


 
138 English
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
8 ADVANCED MENU SET
The following settings can be made with <ADVANCED MENU
SET>.
1. ROI SET (JP.139)
Set the Region of Interest
(ROI) to enable recording,
at different picture quality,
only of areas preset on the
monitor or areas where
motion is detected. Areas
where intruders are
detected, for example, can
be recorded at higher
picture quality.
2. ALARM NOTICE SET (JP.144)
Receive notification by e-
mail when an alarm event
or device malfunction
occurs.
This cannot be set from
the digital video recorder.
Set this on a PC
connected to the network.
3. CAMERA CONTROL SET (JP.145)
Set camera control when
cameras with remote
operation capability are
connected.
4. PPP SET (JP.147)
Displays the PPP settings.
This cannot be set from
the digital video recorder.
Set this on a PC
connected to the network.
5. TIME ZONE/NTP SET (JP.149)
Use the Internet or an NTP
server on a LAN to
synchronize the time.
[EXIT/OSD] button
Jog dial
Shuttle dial
[MENU] button
[FUNC.] button
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
8.ADVANCED MENU SET ->
MOVE:JOG SELECT:SHUTTLE
Main Menu
Configuration
<ADVANCED MENU SET>
1.ROI SET ->
2.ALARM NOTICE SET ->
3.CAMERA CONTROL SET ->
4.PPP SET ->
5.TIME ZONE/NTP SET ->
MOVE:JOG SELECT:SHUTTLE
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : OFF OFF
STATIC AREA 2 : OFF OFF
STATIC AREA 3 : OFF OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ALARM NOTICE SET>
ALARM NOTICE : OFF
SMTP SERVER ADDRESS :
USER MAIL ADDRESS :
SEND MAIL ADDRESS SET ->
SUBJECT :
AUTHENTICATION : NO USE
POP3 SERVER ADDRESS :
USER ID :
PASSWORD :
<CAMERA CONTROL SET>
CH PROTOCOL ADD | CH PROTOCOL ADD
01 SANYO COAX 000 | 09 OFF ---
02 BBV COAX --- | 10 OFF ---
03 PELCO COAX --- | 11 OFF ---
04 2ND RS-485/422 001 | 12 OFF ---
05 OFF --- | 13 OFF ---
06 OFF --- | 14 OFF ---
07 OFF --- | 15 OFF ---
08 OFF --- | 16 BBV COAX ---
2ND RS485/422 PROTOCOL : OFF
<PPP SET>
DIAL UP : OFF
DIAL UP SET ->
DIAL IN : OFF
DIAL IN SET ->
CIRCUIT TYPE : DTMF
MODEM INI. COMMAND :
BAUD RATE : 115200 bps
DATA SIZE : 8 bits
PARITY : NONE
STOP BIT : 1
<TIME ZONE SET>
TIME ZONE
GMT Dublin, Lisbon, London
<NTP SET>
SYNC. WITH NTP SERVER : OFF
NTP SERVER ADDRESS : 0. 0. 0. 0
TIME TO SYNCHRONIZE : 01:00
e00_l8hbd_xe_7.book Page 138 Tuesday, April 5, 2005 11:41 AM