Filter
Top Products
82 English
RECORD SET2
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
z
The archive area cannot be automatically overwritten. Set
overwrite permission (
J
P.79) when the recording area is full.
z The recording rate automatically changes to 50FPS when
setting “AUTO ALARM COPY” for “ARCHIVE AREA”.
• When the alarm recording setting is 100 FPS for the
recording rate (JP.93)
• When the program setting total exceeds 50 FPS
Use the following procedure to set the storage period for
recorded data.
When the set period has expired, the corresponding data
cannot be played back.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select “2.RECORD
SET” and then turn the shuttle dial
clockwise.
The <RECORD SET> screen is displayed.
3 Turn the jog dial to select
“3.RECORDING CONDITIONS SET” and
then turn the shuttle dial clockwise.
The <RECORDING CONDITIONS SET> screen is displayed.
4 Turn the jog dial to select “AUTO
DELETE” and then turn the shuttle dial
clockwise.
“OFF” flashes.
Setting auto deleting
MENU
<RECORDING CONDITIONS SET>
RECORDING AREA
OVERWRITE : ON
ARCHIVE AREA
MODE : MANUAL COPY
REMAINING DISK WARNING : 1 %
AUTO DELETE : OFF
<RECORDING CONDITIONS SET>
RECORDING AREA
OVERWRITE : ON
ARCHIVE AREA
MODE : MANUAL COPY
REMAINING DISK WARNING : 1 %
AUTO DELETE : OFF
e00_l8hbd_xe_7.book Page 82 Tuesday, April 5, 2005 11:41 AM