Filter
Top Products
48 English
SEARCHING FOR RECORDED VIDEO5
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
6 Turn the jog dial to select “PREVIEW”.
7 Turn the shuttle dial clockwise.
Each time the shuttle dial is turned clockwise, a different
motion sensor screen is displayed on the preview screen.
If “NOT FOUND!” is displayed
Set the motion sensor again.
8 Turn the jog dial to select “VIEW” and
then turn the shuttle dial clockwise.
Normal playback begins for the specified recording.
z If “- -” is specified for “CHANNEL”, the videos are displayed
on multi 16 screens (on multi 9 screens for the DSR-
5009P). If “01” to “16” (“01” to “09” for the DSR-5009P) is
specified for “CHANNEL”, playback can be performed for
only the specified camera number.
In such a case, the title information, date information and/
or time information may not be displayed completely.
z To playback a recording from a different camera, stop the
current playback and then repeat the setting process from
the beginning.
Viewing video detected by the motion sensor
< MOTION DETECTION SEARCH >
SEARCH FROM : NORMAL / CHANNEL : --
START :
12-09-03 10:00
END :
12-09-03 20:00
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
< MOTION DETECTION SEARCH >
SEARCH FROM : ALARM / CHANNEL : --
START :
12-09-03 10:00
END :
12-09-03 20:00
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
e00_l8hbd_xe_7.book Page 48 Tuesday, April 5, 2005 11:41 AM