Filter
Top Products
28 English
MONITORING VIDEO FROM A CAMERA2
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
2 Press the [QUAD] button.
The video from the cameras is displayed in quad screen on
monitor 2.
3 Press the [SEQUENCE] button.
The four images of the quad screen on monitor 2
automatically change in order of cameras No. 1-4, 5-8, 9-12
and 13-16.
On the DSR-5009P, the video changes automatically in order
of cameras No. 1-4, 5-8, 9-3, etc.
4 Press the [SEQUENCE] button to return
to normal quad-screen display.
Automatic selection ends and normal quad-screen display
returns.
2 Set “MON.2 DISPLAY” from the
<ALARM OPERATION SET> screen to
“ON”. (JP.103)
When an alarm occurs, the corresponding video is displayed
in full screen on monitor 2.
3 Press the [MON2] button to end the
monitor 2 setting procedure.
The MON2 indicator turns off.
Setting automatic quad-screen selection
03
06
01
0907 08
04
01-01-05 00:00:00
01
03
02
04
Monitor 2
Main monitor
QUAD
01
02
03
04
11
12
15
16
07
08
Monitor 2
Displaying alarm video in full screen format
01-01-05 00:00:00
04
MON2
e00_l8hbd_xe_7.book Page 28 Tuesday, April 5, 2005 11:41 AM