Filter
Top Products
COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 90
. . . . .
GAMma
Output Sets the playback gamma.
HANDShaking
Miscellaneous Selects hardware or software handshaking for the serial control
port.
Help
Miscellaneous Help, without an argument will display the entire serial
command set.
HOSTNAME
Miscellaneous Sets Ethernet hostname.
ID
Miscellaneous Displays product ID, serial number, name, firmware version,
date of manufacture and more.
INputAutoSync
Input Engages the RGB input autosync circuitry.
INputFormat
Input Reports the type of signal selected for record.
INputLOAD
Input Loads the indicated entry from the Timing List to the RGB input
channel.
INputMODulus
Input Adjusts the sample point of the analog RGB analog/digital
converter to optimize the digitized picture quality.
INputNAME
Input Assigns a name to the input and its timing characteristics.
INputSAVE
Input Saves the RGB input characteristic to the selected entry in the
Timing List.
INputSouRCe
Input Selects between DVI and RGB input types.
INputTiMing
Input Sets the timing of the analog RGB input.
IPADDRess
Miscellaneous Sets or reports the DGy 201x IP address.
IPGateWay
Miscellaneous Sets or reports the IP gateway address.
IPSubNET
Miscellaneous Sets or reports the system subnet mask.
IRIGSTandarD
Time Sets the type of IRIG signal to be connected to the IRIG input.
LiStCLIPs
Clip/Disk Displays a list of all recorded clips in the current directory.
ListEVeryMARK
Record/Play Lists the timecode and description of all event marks in all clips
on both disks.
ListMARK
Record/Play Displays the timecode and description of the mark number
specified.
MACADDRess
Miscellaneous Displays the DGy 201x MAC address.
MachineSTATus
Record/Play Displays the operational state of the DGy.
MARK
Record/Play Creates an event mark within the current clip.
MKDIR
Clip/Disk Makes a new directory. Relative or absolute pathnames are
allowed.
MOUNT
Clip/Disk Mounts an optional remote drive to the DGy file system.
NextCLIP
Record/Play Moves from the current clip (in Play or Pause) to the beginning
of the next clip.
NEXTMARK
Record/Play Sends the recorder to the next event mark from the current
position and cues there.
Table 6-1 Alphabetical Command Summary (Continued)
Command Category Description