Filter
Top Products
INSTALLATION AND SET UP
Rear Panel
350-9047 v3.0.1 DGy Model 201x User’s Guide 15
. . . . .
• Disk Power Indicator
The Disk Power light indicates that power is applied to the
removable disk drive. The power is disabled when the key lock
is in the correct position to remove or install a drive. The drive
cannot be removed or installed when this light is illuminated.
• Disk Indicator
The Disk activity light indicates read or write activity to the
removable disk. Do not remove the drive while the disk is active.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REAR PANEL
The figure below shows a view of the DGy 201x rear panel. Click on the
numbered callouts for more information on each item. Click on each
connector for a description. Complete pinout information can be found in
Appendix A .
Figure 2-2 DGy 201x Rear Panel
1) Power Connector
One AC Power Connector (IEC 320 3-pin) is provided for the
system’s universal power supply. The DGy operates from any
power source with a line voltage in the range of 100 - 240 VAC.
2) Graphics Input
The Graphics Input is a DVI-I connector supporting both
analog RGB and digital DVI input signals. An adapter is supplied
with the unit to convert to a standard VGA 15-pin sub-miniature
connector.
Important Do not unlock while there is disk activity. This will
cause loss of data.