Filter
Top Products
OPERATION
DGy Control Panel
350-9047 v3.0.1 DGy Model 201x User’s Guide 26
. . . . .
3) Clip Status
This display provides timecode status for the selected clip. Click
the display to toggle between different counters:
~ In Stop mode, the counter always indicates the date and
time at the start of the recording for the selected clip.
~ In Play mode, the counter displays the traversing
Timecode of the original recording.
~ Click on the time field to switch the display to Elapsed
Time.
~ Click again on the time field to switch the display to Time
Remaining.
~ Click on the time field to return the display to Timecode.
4) Disk Capacity Indicator Bar
This bar visually indicates the available space on the selected
disk drive. The solid blue area represents the amount of disk
used, as a percentage of the whole.
5) Machine Status
Icons appear in this area to indicate the Record/Play status:
~ Play
~ Pause
~ Record
~ Fast or Slow Forward (+ speed)
~ Fast or Slow Reverse (+ speed)
~ A - Entry point set for play loop (pending exit point)
~ A - B Play Loop active
6) Clip Name
This line indicates the name of the clip currently recording or
playing back. Click the
Clip Name label to display the Clip
Browser window, which enables the selection of clips for
playback or recording. Refer to the Clip Browser Window
on
page 35 for details.
7) Clip Path
This line indicates the current clip path. Click the Clip Path label
to display the Clip Browser window to select clips for playing or
recording and set the desired path. Refer to the Clip Browser
Window on page 35 for details.
8) Current Position Slider
The Current Position Slider represents the full clip duration.
During playback, the “dot” moves to indicate the relative
playback point within the clip.