Filter
Top Products
OPERATION
Options Window
350-9047 v3.0.1 DGy Model 201x User’s Guide 42
. . . . .
. . . . . . . . .
PLAYBACK TAB
The figure below shows the Options window with the Playback tab
selected.
Figure 3-11 Playback Tab
FIND CLIP BY TIMECODE
When a recording is made the recording is stamped with a
timecode. The
Playback tab provides the ability to go directly to
a timecode position providing random access to any point within
a clip. This is equivalent to the R
ealTimeSeek command.
Seeking to a timecode can be done when the DGy 201x is in
either
Play, Pause or Stop mode.
Use the following procedure to go to a specific timecode:
1) From the DGy Control Panel (Figure 3-1) click on the
Options button.
2) In the Options window select the Playback tab.
3) Select the date of the clip by entering directly into the Date
field or using the spin controls.
4) Select the desired seek time by entering it directly into the
Time field or use the spin controls.
5) Click on the Go button.
6) The DGy 201x will cue to the specified timecode if the
timecode is within the scope of the current clip.
7) Click on Play to commence playback from the specified
point.