Filter
Top Products
OPERATION
Options Window
350-9047 v3.0.1 DGy Model 201x User’s Guide 49
. . . . .
~ Select the Source of the Audio input to Line or
Microphone.
~ If using a microphone input that requires power to
supply the microphone, select the
Phantom Power
check box.
~ Set the Audio Sampling Rate based upon the desired
quality level. Full CD quality audio is provided using the
default 44.1 kHz sample option. This is equivalent to a
data rate of 176 kBytes per second.
IMAGE ADJUSTMENTS
When the Video Input is set to RGB, click Image to display the
Image Adjustment window.
Figure 3-17 Image Adjustment Window
Two image adjustments can be made to the input signal:
~ Brightness
~ Contrast
These categories are enabled dynamically, depending on the
selected input. To adjust a parameter, use the associated slider
control or adjust numerically with the up/down selector.
MAKING TIMING ADJUSTMENTS
Timing List parameters can be used when the Video Input has
been set to RGB. It is not generally necessary to manually set
Input Timing if Autosync, the default,
is enabled. In the default
mode, the timing is synchronized to the input signal. If the
source is slightly unstable, the autosync circuitry must
constantly re-acquire the signal; selecting the timing from the list