Filter
Top Products
OPERATION
Options Window
350-9047 v3.0.1 DGy Model 201x User’s Guide 51
. . . . .
To return to autosync for RGB again select RGB for Video Input. Input
video Autosync is restored.
CREATING A NEW TIMING ENTRY
If there is no entry in the timing list that matches a specific signal, a new
one can be created. Find an entry in the list that is very close to the
required parameters. Load the entry, modify it, and then save the new
entry to the user defined timing list. There are over 100 available user
entries.
Use the following procedure to create a new (user defined) entry in the
timing list:
• Click the Edit button in the Input Timing section of the Input
Timing page.
• Enter new timing parameters into each of the timing parameter
boxes.
• Scroll to an empty timing list number above #100 in the Timing
List entry box.
• Click the SAVE button.
A dialog box will open allowing you to name the new entry.
• Enter a name for the new timing entry and click OK.
The name can be up to 23 characters in length and can contain
upper and lower and numeric characters. Avoid the use of a
space or the / or \ characters.