Filter
Top Products
OPERATION
Multicast Streaming
350-9047 v3.0.1 DGy Model 201x User’s Guide 67
. . . . .
SETTING UP A
. . . . . . . . .
MULTICAST SERVER
Follow the steps below to setup the multicast server.
• Click on the Stop button to halt playback or record.
• If the simultaneous control panel is open, close it and open the
standard DGy Control Panel.
• Click on Options and select the Streaming tab. Default
parameters for
Multicast Stream In and Multicast Stream Out are
displayed. To change the stream out
IP Address or Port Number,
double-click on the respective field and enter the desired value.
• To use interframe compression, click the button on the
Streaming tab to display the interframe compression adjustment
window. See
page 45 for a description of the window and for a
full discussion of interframe compression use. After settings
have been made, close the window.
• Close the Options Window.
• On the streaming control panel, click the Select Live Input button.
• On the streaming control panel click the Send Multicast Stream
button. The
Multicast Stream Info window for the output shown
below will open.
Figure 3-29 Multicast Stream Out Info
• Stop the multicast stream out by pressing the Stop button on
the DGy Control Panel Player screen.
SETTING UP A
. . . . . . . . .
MULTICAST CLIENT
Each DGy 201x designated a client to receive the multicast transmission
needs to select the proper Stream In IP address and port number that
were assigned on the DGy multicast server.
Follow the steps below to setup the multicast client.
• Click on the Stop button to halt all playback.
• If the simultaneous control panel is open, close it and open the
standard DGy Control Panel.
• Click on Options and select the Streaming tab.