Filter
Top Products
TECHNICAL SPECIFICATIONS
Connectors and Pinouts
350-9047 v3.0.1 DGy Model 201x User’s Guide 126
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONNECTORS AND PINOUTS
This section provides information about the signal and control
connectors used in DGy 201x.
• DVI-I Connector
• Ethernet Connector
• Ethernet Connector
• RS-232 Connector
. . . . . . . . .
DVI-I CONNECTOR
The DVI connector is used to interconnect graphics devices. This is a
standard connector based on the work of the Digital Display Working
Group (DDWG).
CONNECTOR TYPE AND PINOUTS
The connector used in the DGy 201x is a 29-pin DVI-I connector,
supporting both analog and digital signals. The DVI-I connector (as
shown below) is used for the standard DGy 201x DVI input and output
signals.
Figure A-1 DVI-I Digital/Analog Connector
The 29-pin DVI-I connector (Molex #74320) has the following pin
assignments:
Table A-10 DVI-I Connector Pinout
Pin Signal
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2/4 shield
4 NC
5 NC
6 DDC Clock
7 DDC Data