Filter
Top Products
COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 91
. . . . .
NTSIP
Time Sets the addresses of Network Time Servers used to
synchronize the internal DGy clock.
OUTPUT
Output A query command which returns information on the current
output timing.
OutPuTForMaT
Output This command selects the active format, analog RGB or DVI.
OutputMode
Output Sets the output mode to FreeRun or PlayBack.
OutPutTiMing
Output Sets the timing for the current output.
OutPutTiMingLOAD
Output Sets the output raster to the timing selected from the Timing
List.
OutPutTiMingNAME
Output Assigns a name to the current output timing.
OutPutTiMingSAVE
Output Saves the timing data of the current output raster into the Timing
List.
PAUSE
Record/Play This command pauses the Play or Record mode.
PLAY
Record/Play Switches the DGy to Playback mode and plays a previously
made recording.
PLAYLOOP
Record/Play Plays the current clip or list of clips to the end and automatically
replays the list until stopped.
PLAYSPeeD
Record/Play Set the playback speed. Applies to Forward and Reverse play
modes.
PrevCLIP
Record/Play Moves DGy from the current clip (in Play or Pause) to the
beginning of the previous clip.
PREVMARK
Record/Play Sends the recorder to the previous event mark from the current
position and cues there.
PROTECTCLIP
Clip/Disk Change the status of an unprotected clip to protected.
PWD
Clip/Disk Gives the absolute path of the current directory.
RealTimeClockSET
Time Sets the internal DGy real time clock.
RealTimeClockSYNC
Time Provides a means to synchronize a DGy to an external time
reference or other DGy units.
RealTimeClockSYNCPERi
od
Time Sets the update rate for synchronizing the DGy internal clock to
an external time reference.
RealTimeSeek
Clip/Disk Places the DGy at the selected recording real-time within the
selected clip.
RECord
Record/Play This command switches the DGy to Recording mode.
RECordBitRate
Record/Play Sets the degree of compression i.e. quality level (Stated in bits/
pixel).
RECordFrameRate
Record/Play Sets the rate at which input frames are compressed and stored
to disk.
RECordLOOP
Record/Play Enables or disables the disk overwrite feature.
RENameCLIP
Clip/Disk Renames clipname1 to clipname2.
Table 6-1 Alphabetical Command Summary (Continued)
Command Category Description