Filter
Top Products
COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 115
. . . . .
MISCELLANEOUS
. . . . . . . . .
COMMANDS
The table below lists all DGy 201x miscellaneous commands, their
arguments and detailed descriptions.
Table 6-10 Miscellaneous Commands
Command Arguments Description
Help [<command>] Help, without an argument will display the entire
serial command set. Help, with a command as an
argument will display detailed information about
that command.
ID (none) Displays the following DGy information:
• Product type
• Date of manufacture
• Serial number
• Firmware version number
• Input type
VERsion (none) Displays the following DGy information:
• Firmware version
• FPGA version number,
• Web Control Panel (WCP) version
number.
BAUDrate <9600 | 19200 |
38400 | 57600 |
115200>
Sets the serial port baud rate. Operation of the
serial port at the highest possible speed is
recommended.
Default: 115,200
ECHO <ON | OFF> Turns the serial echo On/Off. The echo is only on
commands typed and sent to the unit.
Note: The Echo setting has no effect on responses
issued by the DGy; responses are always visible,
regardless of the Echo status.
Default: ON
HANDShaking <HardWare |
SoftWare>
Sets the type of flow control on the serial port.
The HardWare handshaking uses CTS/RTS
control.
The SoftWare handshaking protocol is XON-XOFF.
Default: SoftWare
HOSTNAME <hostname> Sets Ethernet hostname.
Default: DGy