RGB Spectrum DGy 201x DVR User Manual


 
OPERATION
DGy Control Panel
350-9047 v3.0.1 DGy Model 201x User’s Guide 29
. . . . .
To return to normal (1x) playspeed immediately from any
playspeed click on the
Play button.
If
Pause is clicked in the fast forward mode, clicking on Pause
again will continue in fast forward at the previously selected
speed.
If
Fast Reverse is selected while in the Fast Forward mode, the
DGy 201x will reverse direction and play at the lowest reverse
speed.
Pressing the
Stop button will cause play to stop and cancel the
fast forward speed setting.
16) Next Clip
Click the Next Clip button to move to the clip subsequent to the
clip currently selected. This command is active only when in the
Play or Pause mode, and is inactive in the Stop mode.
~ Clicking the Next Clip button in the Play mode causes
DGy 201x to cue to the beginning of the next clip in the
clip list (see
Clip Browser Window) and automatically
enter the Pause mode. To begin playback click on the
Play or Pause buttons.
~ Clicking the Next Clip button in the Pause mode causes
DGy 201x to cue to the beginning of the next clip in the
clip list (see
Clip Browser Window). To begin playback
click on the Play or Pause buttons.
17) Goto Previous Mark
After some Event Marks have been entered in the Event list
(see Set Mark
in the following section), the Prev and Next mark
buttons can be used.
Click
Prev to cue to the previous event mark.
Click on
Play or Pause to continue playback from the new cue
point. This command works in
Play or Pause modes only.
18) Set Mark
A mark can be set while in the Record or Play mode. In Record,
click
Mark to set a mark immediately. In Play, click Mark at the
current playback position of the clip. A mark will be entered in
the Event Marking list. Marks are automatically provided with a
unique mark number derived from the timecode on the
recording. Once an Event mark is created, it can be named. See
Show All Marks
for information on how to name an event mark.
19) Options
Click Options to display the Options window, used to set a
variety of system options, including audio, video, recording, and
streaming parameters. Refer to the Options Window
on page
39 for details.