Filter
Top Products
INSTALLATION AND SET UP
Front Panel
350-9047 v3.0.1 DGy Model 201x User’s Guide 14
. . . . .
• Function Indicators
The Record LED lights when the DGy 201x is in the Record or
Record/Pause mode. The Play LED is illuminated when the
DGy 201x is in Play mode.
• Network Indicators
The Activity LED is illuminated when there is activity on the
DGy 201x network connection. The Link LED glows solid green
when there is a valid Ethernet connection between the DGy
201x and another Ethernet device.
• Fixed Drive Indicators (Option)
The fixed hard disk drive is a factory-installed option.
The Activity LED is illuminated when there is read or write
activity on the fixed hard disk drive. This indicator flashes when
a disk check (fsck) operation is in progress; do not power cycle
the unit during this time.
The Full LED flashes when the optional, non-removable disk is
near maximum capacity.
• Removable Drive Indicators
The Activity LED is illuminated when there is read or write
activity on the standard removable disk. This indicator also
flashes to indicate that a disk check (fsck) operation is in
progress; do not power-off or remove the disk during this time.
The Full LED flashes when the removable disk is near
maximum capacity.
• Removable Disk Drive
Optional removable disk drives are available in two sizes:
238 GB and 476 GB.
• Drive Bay Key Lock
The key lock is used to ensure that the removable drive is
engaged securely in position. The key is required for both
removal and installation of a removable disk drive. The key must
be in the locked position before the DGy 201x can commence
operation.
Important If the DGy 201x is not allowed to complete its shut
down before loss of power, the unit will need to
completely scan its disk drive at the subsequent
power up. During this time, the front panel indicators
will blink. The time required to scan the drive depends
on the number of clips; typically, this can take from
one to ten minutes.