Filter
Top Products
350-9047 v3.0.1 DGy Model 201x User’s Guide 85
6
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMMAND LINE INTERFACE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IN THIS CHAPTER
This chapter discusses the DGy 201x control command set, which
provides access to all of the unit’s functions. The factory timing list is
also provided.
The following topics are discussed:
• Command Overview
• Command Format
• Commands
• Commands
• Factory Timing List
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMMAND OVERVIEW
All DGy 201x functions are accessible by means of ASCII commands
that are used to set one or more system parameters (or values). The
command set is made up of ASCII characters. Note that commands
associated with file and path names are case sensitive. These
commands may be used to control DGy 201x via the RS-232 serial port
or via the Ethernet port using the internal DGy 201x Telnet server.
The DGy 201x can also be controlled using the supplied DGy Control
Panel graphical user interface used on a PC with a standard web
browser. Remote control is typically accomplished using a third-party
controller connected to either the serial or Ethernet port.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMMAND FORMAT
The following topics are discussed in this section:
• Command Line Usage
• Command Help
• Predefined Parameter Values
• Query the Current Setting
• Parameter Ranges
• Optional Parameters