Filter
Top Products
350-9047 v3.0.1 DGy Model 201x User’s Guide 131
B
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMMUNICATIONS SETUP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IN THIS APPENDIX
This appendix provides specific communications setup procedures that
are referenced in
Chapter 2, Installation and Set Up. The following
topics are discussed:
• Serial Communications
• Ethernet Control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SERIAL COMMUNICATIONS
LAUNCHING A
HYPERTERMINAL
. . . . . . . . .
WINDOW
A command line interface is provided for DGy 201x using the serial port.
A full description of available commands is provided in
Command Line
Interface on page 85.
PCs running the Windows Operating system are provided with serial
emulation software known as Hyperterminal. This provides a convenient
method to communicate with the DGy 201x.
Use the following steps to launch a Hyperterminal window on a PC:
1. On the PC, click Start > Programs > Accessories > Communica-
tions > Hyperterminal.
Figure B-1 Hyperterminal Path