Filter
Top Products
COMMUNICATIONS SETUP
Serial Communications
350-9047 v3.0.1 DGy Model 201x User’s Guide 133
. . . . .
.
Figure B-4 COM Properties Dialog Box
5. Configure the PC to match DGy 201x’s pre-configured factory
settings, as follows:
~ Bits per second (baud): 115,200 (default)
~ Data bits: 8
~ Parity: None
~ Stop bits: 1
~ Flow control: XOn / XOff
The DGy 201x can be configured to operate at baud rates from
9600 baud to 115 kbaud. The recommended baud rate is 115
kbaud (default baud rate). In Chapter 6, refer to the Commands
on page 88 for details about changing baud rates.
6. Click OK to display the Hyperterminal window.
7. In Chapter 2, please continue with the Installation on page 17.