Filter
Top Products
OPERATION
Recording Clips
350-9047 v3.0.1 DGy Model 201x User’s Guide 62
. . . . .
Figure 3-25 Remote Disk Mount Network Drive Window
CHOOSING A RECORD DESTINATION
Recordings can be made to the internal disk (removable or optional fixed
disk) or an externally mounted drive (NFS disk mount option). Selection
of the destination is made from the Clip Browser using the following
procedure.
1. If the Clip Browser is not open, open it from the DGy Control
Panel by clicking the
Clip Path. See Clip Browser Window on
page 35.
2. Use the left pane of the browser (Figure 3-6) to navigate the
desired drive and folder.
3. To create a new folder click on the New Folder icon on the Clip
Browser toolbar or select
New Folder from the File menu. Enter
a name in the pop-up dialog box and click
OK.
RECORDING A CLIP
Use the following procedure to record a clip with DGy 201x.
1. From the DGy Control Panel, click Options to display the
Options window.
2. Click the Record tab and set the desired recording parameters,
including input signal selection, quality level, frame rate, and
auto-naming. Refer to the
Record Tab section on page 40 for
details.
Note To unmount a network drive, an alternate drive must
first be selected. From the File menu, select Network
Drive, then Unmount.
Note The removable drive is named /remov, the fixed drive
is named
/fixed and the remote NFS drive is named
/remot.
Do not to confuse the remote and removable
disk names.