Filter
Top Products
OPERATION
Simultaneous Record/Play Option
350-9047 v3.0.1 DGy Model 201x User’s Guide 71
. . . . .
9) Show All Record Event Marks
Click All to display the Event Marking window. See Figure 3-2,
Event Marking Window, on page 30 and the succeeding
paragraphs for more information on Event Marks.
10) Place Mark
During a recording, click Mark to set a mark immediately. A mark
will be entered in the Event Marking list. Marks are
automatically provided with a unique mark number derived from
the timecode on the recording. The Event marks are saved with
the clip and are accessible when played back.
Simultaneous Record/Play Operation
1. The Record and Play resolution of each clip must be identical.
Use the
Clip Browser to determine the value for the playback
clip. This value is set on the Record and
Input tabs of the Options
window.
2. Simultaneous Record/Play functions only in single-channel
mode.
3. The Input Timing and Output Timing must be identical.
4. The maximum settings are:
Quality Medium, 1.0 bit rate
Frame Rate 15 fps
Resolution 1280x1024
OR
Quality 0.9 bit rate
Frame Rate 7 fps
Resolution 1600x1200
5. Event marks may be placed or deleted in simultaneous mode.
6. The following are not supported in simultaneous mode:
~ Next Clip or Previous Clip.
~ Next Frame or Previous Frame.
~ Current Position Slider.
~ Variable speed playback: slow reverse, fast reverse,
slow forward, or fast forward.
~ Goto Previous Mark or Goto Next Mark.