Filter
Top Products
COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 106
. . . . .
STREAMING
. . . . . . . . .
COMMANDS
The table below lists DGy 201x streaming commands.
Table 6-7 Streaming Commands
Command Arguments Description
StreamFragmentSTATus (none) Returns the current state of multicast streaming by
displaying either ON or OFF for both the
STREAMIN and STREAMOUT functions.
STREAMIN (none) Initiates the incoming multicast stream to be
received, decoded, and viewed on the client DGy
201x decoder. To begin subscribing to a multicast
stream, first set the
STREAMINADDR and
STREAMINPORT.
STREAMINADDR [ddd.ddd.ddd.ddd] Sets or displays the incoming multicast stream IP
address.
To determine the current multicast stream IP
address without changing it, use the command
without an argument.
Default: 225.0.0.37
STREAMINPORT <5001...65535> Sets or displays the incoming multicast stream
transmission port.
To determine the current port without changing it,
use the command without an argument.
Default: 6000
STREAMINSTOP (none) Stops the incoming multicast stream.
STREAMOUT (none) Initiates the outgoing multicast stream transmission
from the server DGy 201x.
STREAMOUTADDR [ddd.ddd.ddd.ddd] Sets or displays the outgoing multicast stream IP
address.
To determine the current IP address without chang-
ing it, use the command without an argument.
Default: 225.0.0.37
STREAMOUTPORT <5001...65535> Sets or displays the outgoing multicast stream
transmission port.
To determine the current port without changing it,
use the command without an argument.
Default port setting: 6000
STREAMOUTSTOP (none) Stops the outgoing multicast stream transmission.
RECordFrameRate <0 .. 100> When streaming, this must be set to 0 to allow the
DGy to automatically calculate the maximum rate.
Default: 0